ESSENTIAL INDUSTRIAL SERVICESessential.ind.services@gmail.com, Mumbai
09004040171
Ph: 022-23427872
Fax: 022-23400890
Authorized Distributors for Hylomar Universal Blue
Description
Hylomar Universal Blue is a polyester urethane based sealant that is non-setting and nonhardening
even at high temperatures. The compound is resistant to a wide range of fluids including
all industrial fuels, oils, water and brine, air, turbine and piston engine combustion products, water,
water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and
kerosene fluids (Avtur & Avcat) and fluorocarbon refrigerants. Hylomar Universal Blue can be used
to seal joint faces or threaded parts.
Physical Properties
Chemical Basis Polyester Urethane
Temperature range -50°C to 250°C
LIGHT GRADE
Film Thickness 0.015 mm
Surface Finish Max 2.0 μm
Area covered by 100g 1.875m²
Product coverage after drying 2mg/cm²
MEDIUM GRADE
Film Thickness 0.03 mm
Surface Finish Max 3.0 μm
Area covered by 100g 1.275m²
Product coverage after drying 4mg/cm²
HEAVY GRADE
Film Thickness 0.09 mm
Surface Finish Max 3.5 μm
Area covered by 100g 0.56m²
Product coverage after drying 12mg/cm²
Instructions for use
Hylomar Universal Blue should be applied to clean dry surfaces. Apply a thin film or bead to one or
both surfaces. Once applied, sufficient time should be allowed for the solvent to evaporate. Unlimited
assembly time allows precise alignment of joints to be made. Due to the nature of the compound,
fasteners may be required to be re-tightened to the correct torque.
Hylomar Universal Blue can be removed from dismantling components by rubbing with a cloth soaked
with Easy Clean Solvent, Hylomar Gasket Remover or Hylomar Rally and Grand Prix Wipes. No
scraping is necessary.
Typical Applications
Hylomar Universal Blue enables the effective sealing of metal to metal and plastic to plastic
components. Typical applications include water and oil pumps, instrument inspection covers,
cylinder heads and sumps, and it can also be used for the coating for pre-formed gaskets, weather
proofing, motors and outdoor high voltage circuit breakers. Inlet manifolds, timing case covers, oil
pump joints, gear box and transmission components or thread sealing it has also been successfully
been used in the assembly of gas turbines, water cool generators and turbo vacuum systems.
There is no staining of copper and silver, etc., from traces of volatiles at elevated temperature, and
is therefore suitable for joints, and threads in close proximity to switch mechanisms, etc.
Light grade: inlet manifolds, timing case covers, oil pump joints, gearbox and transmission
components, thread sealing and any finely machined surface.
Medium grade: water and oil pumps, instrument inspection covers, cylinder heads, sumps and
most machined surfaces.
Heavy grade: gas turbines, water cooled generators, turbo vacuum systems, gearboxes and most
rough machined surfaces.
Handling and Safety Properties
The compound is non-flammable
Product contains Dichloromethane
Labelling = Harmful. Carc cat 3. Phrases R40, S2, S23, S24/25 & S36/37.
Packaging
Hylomar Universal Blue is available in 40 g tube, 100 g tube, 350 g cartridge, 250 ml brush top tin, 1
litre screw top tin, 5 litre screw top tin, 6.5 kg lever lid tin, 25 kg kegs and aerosols. For Technical Data
on the Hylomar Universal Blue Aerosol Grade see separate Data sheet.
The shelf life of Hylomar Universal Blue is 24 months when stored in unopened original containers
between 5° and 25°C.
For further information please contact
Essential Industrial Services
essential.ind.services@gmail.com
09004040171
Ph: 022-23427872
Fax: 022-23400890
